Aerialscope

Premier Mid-Mount Aerial Platform

Years of experience coupled with innovative design make the Aerialscope II the safest, toughest, and most efficient choice on the market. The Aerialscope II is rugged, safe and easy to use. It is a tough, dependable and highly maneuverable machine. Experience Matters.

Capitol, Marauder and Attacker are available chassis choices
Overall height can be as low as 130" on 75' or 95' tower platform
Turning radius is 40'5" for both 75' and 95' tower platform
Boom extends 9 degrees below grade to 75 degrees above grade
The platform can rest on the ground 37' from the truck
Lift capacity of the platform is 1000 lbs.
Boom is capable of lifting 5000 lbs. with boom fully retracted
2000 GPM waterway
Capable of 1000 lb. Tip Load While Flowing 1000 GPM, unrestricted

Torque Box Design

Carries turntable load to outriggers
Transmits load of boom support cradle to frame rails
Stiffens frame rails for best ride
Provides enclosed storage for ladders with vertical orientation

Turntable

Same size for both 75' and 95' towers
Street-side access
Full-service access pedestal control station

Stability — It’s in the Footprint

Four vertical stabilizers
Two radial outriggers (tormentors)
Vertical stabilizers have a “rods down” design
Lights assist in rapid spotting and deployment of tormentors
No grease required on tormentor pivot with polygon bushings and corrosion-protected, heat treated pivot pins

Rescue Confidence

Two rotation drives reduce backlash and increase smoothness of rotation system
Rotation system allows for precise placement of the platform

Turntable Console

Driver’s side of turntable, facing the platform
Convenient height and user friendly layout
Hinged panels provide easy access for inspection and maintenance
Three individual control handles allow for single or multi-function operation

Jack Pad Storage

Front pads are stored in either a bumper compartment (22" only) or under the bumper
Rear pads are stored conveniently in under-body brackets, where used

Hydraulic Pump

PTO Driven with hotshift control
Large capacity, load-sensing design allows all aerial functions to operate simultaneously at normal speed
Smooth operation at just 1400 RPM
Hydraulic generator pumps mount to the back of the aerial pump, up to 30 kw